Simple mod to get better turning for TT by Dez Chand

 

Hi chaps, someone was asking after the mods that Colin did to transform my TT stocker, so I've constructed this image to make it real clear.

The two bolts that go through the chassis and head support plates need dropping 8mm, see the red arrows. Just drill a hole 8mm below each current hole in the two main chassis plates and drop the whole headstock, reset you steering centre trim and you are away, took about 15 minutes total, and gained me so much ground clearance that the bike turned far sharper after that, brilliant move, thanks Colin.

Also see the green arrow, where I've moved the front crash bar mount to where the rear one was, and drilled a new rear most hole to hold the crash bars more central between the wheels, so when the bar touches down the bike doesn't understeer off the planet. Do it, you won't regret it !